Sign in to continue

Reset password

Set your password

Loading prices...
Paradise Pools Australia
Price list · Current
Estimate $0
Pricing notes
No pools match your search.
Site specific extra costs▾
Bobcat & crane pricing
Pool length
Access width (narrowest point)
Min. height required:
Crane required
Water truck required
Additional buffer
Sleeper pool (+$3,000)
Pool waterline
Extra area beyond coping
Deep end
0
Shallow end
0
Side 1
0
Side 2
0
Each row = 0.4m out from that side.
Layout — top view
Pool waterline
Coping (0.4 m)
Extra rows (0.4 m ea.)
Areas
Pool waterline
0.00
m²
Coping area
0.64
m²
Total with coping
0.64
m²
Additional tile / concrete area
1.92
Beyond the standard coping allowance
Total footprint — for Canibuild
—
Overall size incl. pool & coping (L × W)
Concrete & tiling — around the pool
Work type
Rate/ m²
Area override (optional, m²) m²
Leave blank to use the pool measurements above. Enter a figure for a standalone new area.
Concrete pump
Pump cost
Additional pour — level with coping tiles $
Filter / heater slab $
$0
—
Tiling on existing concrete
Work type
Fencing perimeter
Outer perimeter — fence length at tile edge
—
m · linear metres around the outside of the tiled area
Fencing cost
Fence type
$8,775
Glass (7.5m, combined=30.0m, 20m+ tier, incl. 1 gate): $480/m = $3,600
Aluminium (22.5m, 21m+ tier, incl. 1 gate): $230/m = $5,175
Concrete strip footings (fences)
Footing depth
LengthLM
$0
Concrete strip footing
Total estimate
Tile installation $1,922
Fencing $8,775
TOTAL $10,697
No quote started yet

Choose a pool on the “Pool & site costs” tab and the quote summary will appear here.

Quote summary
Pool + site costs
—
—
Total—
Push to CRM
Uses the customer details entered at the top of the page.

Setback Requirements

Absolute minimums — always add 100mm margin when possible.

At a glance
House slab / tiled roof / alfrescoDepth of pool (often −200mm)
Lightweight patio roof500mm
Retaining — pool on low sideWall height or pool depth — least
Retaining — pool on high sideBy wall height ↓
Sewer manhole1.5m
Sewer I/O1m
Council pipes1.2m or 3m
HSTP sprayer6m from dispersal
House slab / Tiled roof / AlfrescoDepth of pool

Setback = depth of pool away from the slab.

You can go closer than the pool depth when:

  1. A full-length bench is adjacent to the house (subtract width of bench of depth of pool)
  2. The pool is higher than the slab
  3. The slab/footing is lower than the top of the pool (subtract the height difference between top of pool and bottom of slab/footing)
  4. Slab piers in place
Rule of thumb: it's almost always possible to go 200mm closer to a house slab because of (C), when necessary.

Note on (D): requires an engineering plan as proof of piers — typically a "soil test and slab design".

Lightweight patio roof500mm

500mm from slab (coping plus drainage).

Retaining — pool on low sideLeast of the two

Setback is the height of the wall or the depth of the pool — whichever is least.

Retaining — pool on high sideBy wall height

When room is available:

  • Walls 1m or higher — bench must not be on the retaining-wall side due to fill. If not possible, contact Shannon.
  • Walls up to 1.4m — pool can be 500mm away.
  • Walls above 1.4m — set back the height of the wall.
Piers required on the retaining-wall side of the pool for walls 1m or higher.

Tight for space? It may be possible to go closer — contact Shannon.

Pipes, manholes & I/Os+100mm always
Sewer manhole1.5m
Sewer I/O1m
Council pipes1.2m or 3m (by diameter)
Always add 100mm margin on these.
HSTP sprayers6m

6m from the dispersal area — approx 16m from the centre of the sprayer circle.

The pool must comply with the HSTP plan, not the hose length on site.